SODIUM CUMENE SULFONATE

Table of Contents

SODIUM CUMENE SULFONATE

SODIUM CUMENE SULFONATE acts as a hydrotrope and may be used to increase the solubility of other compounds.

In conjunction with non-ionic surfactants SODIUM CUMENE SULFONATE will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. 

SODIUM CUMENE SULFONATE may also be used to reduce the viscosity of concentrated surfactants and formulations.

EC / List no.: 248-983-7

CAS no.: 28348-53-0

Mol. formula: C9H11NaO3S

IUPAC names:

Benzenesulfonic acid, (1-methylethyl)-, sodium salt

sodium 2-phenylpropane-2-sulfonate

sodium 2-phenylpropane-3-sulfonate

SODIUM CUMENE SULFONATE

Sodium cumene sulphonate

SODIUM CUMENESULPHONATE

Sodium cumenesulphonate

Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.

SODIUM CUMENE SULFONATE is used as coupling agents to solubilize the water insoluble and often incompatible functional ingredients of household and institutional cleaning products and personal care products.

SODIUM CUMENE SULFONATE is used to solubilize complex formulations in water.

SODIUM CUMENE SULFONATE funtions to stabilize solutions, modify viscosity and cloud-point, limit low temperature phase separation and reduce foam

SODIUM CUMENE SULFONATE is an amphiphilic substance composed of both a hydrophilic and a hydrophobic functional group. 

The hydrophobic part of the molecule is a benzene substituted apolar segment. 

The hydrophilic, polar segment of SODIUM CUMENE SULFONATE is an anionic sulfonate group accompanied by a counter ion (sodium).

SODIUM CUMENE SULFONATE is produced by sulfonation of an aromatic hydrocarbon solvent (cumene). 

The resulting aromatic sulfonic acid is neutralized using an appropriate base (e.g.,sodium hydroxide) to produce the sulfonate or hydrotrope. 

SODIUM CUMENE SULFONATE is a ‘pure’ substance but is produced and transported in granular solids typically at 90-95% level of activity. 

The other components of granular solids include sodium sulphate 

SODIUM CUMENE SULFONATE is an anionic surfactant used in liquid and powdered detergent formulation, heavy duty cleaners, wax strippers and dishwashing detergents. 

SODIUM CUMENE SULFONATE functions as a solubilizing agent, coupling agent and cloud point depressant.

SODIUM CUMENE SULFONATE, also known as benzenesulfonic acid, (1-methylethyl)-, sodium salt, and sodium 2-isopropylbenzenesulfonate, is used in several applications owing to its viscosity-reducing properties. 

Furthermore, SODIUM CUMENE SULFONATE is used as a coupling agent, solubilizer, and anti-caking agents in powder detergents. 

Additionally, SODIUM CUMENE SULFONATE promotes compatibility among several chemicals present in multi-component systems. 

The use of chemicals in a wide range of shampoos and dishwashing agents is expected to drive the sodium cumenesulfonate market.

Sodium cumenesulfonate is a hydrotope compound, which consists of a hydrophilic part and a hydrophobic part, similar to surfactants. 

These compounds can get dissolved in water. 

There are several advantages of sodium cumenesulfonate. 

SODIUM CUMENE SULFONATE increases the solubility for less soluble organic matter; lowers the cloud point of aqueous formulated products, effectively promotes the compatibility of various ingredients present in a multicomponent system, and moderates the viscosity of aqueous formulated products. 

SODIUM CUMENE SULFONATE is used as a solubilizer and cloud point depressor in wax cleaners, air mist drilling, laundry washing, drilling fluids, stimulation fluids, anti-caking agents, and coupling agents in powdered detergents. 

SODIUM CUMENE SULFONATE is also used in metal processing applications, oilfield applications, and hydrogen sulfide scavangers. 

Cost of SODIUM CUMENE SULFONATE highly depends on the cost of raw materials. 

Volatilty in raw material prices is likely to hamper the sodium cumenesulfonate market in the near future. 

Heavy exposure to SODIUM CUMENE SULFONATE may cause serious irritation of eyes, irritation of respiratory tract if inhaled, and other health hazards. 

Increasing industrialization and use of household detergents in emerging economies are factors likely to drive the demand for SODIUM CUMENE SULFONATE

Application of SODIUM CUMENE SULFONATE:

Cloud Point Depressor

Solubilizer

Anti-caking Agent

Coupling Agent

Metal Processing

Oilfield Applications

Others

Application of SODIUM CUMENE SULFONATE by End-user Industry: 

Detergent

Chemical

Metal Working

Oil & Gas

Others

Hydrotropes (such as cumene sulphonate) are also used to enhance the solubility of organic materials in the water base. As a result, they have wide range of application

Based on application, the global sodium cumenesulfonate market has been segmented into industrial & institutional, household, oilfield, laundry & cleaning, and others.

ATAMAN CHEMICALS has been a leader in PERFORMANCE CHEMICALS. 

ELTESOL hydrotropes are a proven answer to solubility problems in a wide variety of commercial applications. 

Optimum hydrotrope selection can result in enhanced system performance.

ELTESOL hydrotrope products generate essentially no foam and no wetting action and have minimal influence on surface tension. 

What they off is a cost-effective way to solubilize complex formulas, elevate cloud points and control viscosity.

CAS No.28348-53-0

Chemical Name:Sodium cumenesulfonate

Chemical Description: SODIUM CUMENE SULFONATE

Chemical Group: Hydrotropic Sulfonates & Sulfonates

Synonyms: Eltesol SC 93;Eltesol SC 40 F;Einecs 248-983-7;Stepanate SCS 40;Natriumcumolsulfonat;Sodium cumenesulfonate;Sodium Cumenesulfonate,40%;Sodium cumene sulphatee 40%;Sodium Cumene Sulphonate 40;Sodium cumenesulfonate Factory

Molecular Formula:C9H11NaO3S

Formula Weight:222.24

MOL File:28348-53-0.mol

Eltesol SC 40 F

Sodium Cumenesulfonate,40%

Sodium cumenesulfonate IN STOCK

Sodium cumenesulfonate Factory

(1-methylethyl)-benzenesulfonicacisodiumsalt

Benzenesulfonicacid,(1-methylethyl)-,sodiumsalt

Sodium cumene sulphatee 40%

(1-METHYLETHYL)-BENZENESULPHONICACID,SODIUMSALT

Natriumcumolsulfonat

Ar-cumenesulfonic acid, sodium salt

Benzenesulfonic acid, (1-methylethyl)-, sodium salt (1:1)

Einecs 248-983-7

Sodium cumene sulfonate 10g [28348-53-0]

Eltesol SC93

Stepanate SCS 40

Sodium 2-isopropylbenzenesulfonate

Cumenesulfonic acid sodium salt, isomer mixture

(1-Methylethyl)-benzenesulfonic acid sodium salt

Sodium cumenesulfonate

Sodium Cumene Sulphonate 40

Sodium Cumenesulphonate 40% Solution

sodium 3-propan-2-ylbenzenesulfonate

Sodium isopropylbenzenesulfonate

Sodium Cumenesulfonate (~93% purity)

28348-53-0

C9H12O3SNa

Sodium cumenesulfonate is a hydrotrope organic compound that increases the solubility of a surfactant in a formulation. 

Sodium cumenesulfonate can be found in products such as liquid soaps, dish washing liquids & shampoos, wax cleaners, commercial/ industrial/ household laundry detergents, etc. 

Increasing demand for household and industrial detergent products will drive the sodium cumenesulfonate market demand

Liquid detergent products are popular in developed economies owing to easy usage and higher performance compared to powder detergents. 

Sodium cumenesulfonate is one of the key ingredients used in several liquid detergent products such as Tide and Dreft liquid detergent, among others

The major material used in the production of sodium 2-isopropylbenzenesulfonate includes cumene, sodium hydroxide, and sulfuric acid, among others. 

The prices of these raw materials will hugely fluctuate in the global market scenarios; hence, directly affecting the cost of production. 

Cumene is one of the major raw materials used in the production of sodium cumenesulfonate and is produced from propene and benzene (crude oil derivatives). 

Any fluctuation in the global crude oil prices will hugely impact the overall production cost of sodium cumenesulfonate.

Cumene sodium sulfonate is also known as cumene sodium sulfonate, and molecular formula is C 9h 11naO 3s, is mainly used in making solubility promoter, couplant and auxiliary agent, for organic synthesis, household chemicals and chemical reagent in sanitising agent and other industry.

PRODUCTION OF SODIUM CUMENE SULFONATE:

Sodium cumene sulphonate (SCS) is an anionic surfactant and acts as hydrotropes to modify solubilities, viscosities, and other properties of surfactants and surfactant formulations.  

SCS is produced by the sulphonation of cumene followed by neutralization with sodium hydroxide.  

Sulphonation step: involves the use of oleum, a solution of SO3 in sulphuric acid.  

Neutralization step:  The generated aromatic sulphonic acid is converted to their respective salts by neutralization with sodium hydroxide to produce the sodium sulphonate.    

The neutralization is conveniently done in water, since the sulphonates, and even more so the short alkyl chain hydrotropes, are generally water soluble to the extent of 30–50%.  

Post‐processing step: can involve a solvent extraction to remove sulphones and chemical bleaching.  

If solvent extraction is done, traces of solvent must be removed by distillation, usually as the azeotrope. 

For a low sulphate product treatment with lime may be necessary.  

PATENT for Sodium cumenesulfonate solution and preparation method thereof

CN105330573A

China

Sodium cumenesulfonate solution and preparation method thereof

Abstract

The invention provides a sodium cumenesulfonate solution and a preparation method thereof. 

The preparation method comprises specific steps as follows: 

(1), concentrated sulfuric acid is added to cumene under a stirring condition, the mixture is subjected to azeotropic backflow dehydration, and a reaction is stopped when the water yield is about 95% of the theoretical water yield; 

(2), excessive unreacted cumene is separated under a vacuum condition, collected and recycled; 

(3), a reaction product is neutralized with a sodium hydroxide solution until the concentration of sodium cumenesulfonate is about 40%; 

(4), the product is bleached with hydrogen peroxide, and the high-quality sodium cumenesulfonate solution is obtained. 

With the adoption of the preparation method, the problem of inorganic sulfate in the sodium cumenesulfonate solution can be effectively solved, the content of cumene is controlled under a lower level, the clear and transparent sodium cumenesulfonate solution is obtained, the yield is improved, generation of waste acid and inorganic sulfate is avoided, and the cost is saved.

What is a Hydrotrope ?

A hydrotrope is a compound that solubilizes hydrophobic compounds in aqueous solutions by means other than micellar solubilization. 

Typically, hydrotropes consist of a hydrophilic part and a hydrophobic part (similar to surfactants), but the hydrophobic part is generally too small to cause spontaneous self-aggregation. 

Hydrotropes do not have a critical concentration above which self-aggregation spontaneously starts to occur (as found for micelle- and vesicle-forming surfactants, which have a critical micelle concentration (cmc) and a critical vesicle concentration (cvc)). 

Instead, some hydrotropes aggregate in a step-wise self-aggregation process, gradually increasing aggregation size. 

However, many hydrotropes do not seem to self-aggregate at all, unless a solubilizate has been added. Examples of hydrotropes include urea, tosylate, cumenesulfonate and xylenesulfonate.

The term hydrotropy was originally put forward by Carl Neuberg to describe the increase in the solubility of a solute by the addition of fairly high concentrations of alkali metal salts of various organic acids. 

However, the term has been used in the literature to designate non-micelle-forming substances, either liquids or solids, capable of solubilizing insoluble compounds.

The chemical structure of the conventional Neuberg’s hydrotropic salts (proto-type, sodium benzoate) consists generally of two essential parts, an anionic group and a hydrophobic aromatic ring or ring system. 

The anionic group is involved in bringing about high aqueous solubility, which is a prerequisite for a hydrotropic substance. 

The type of anion or metal ion appeared to have a minor effect on the phenomenon.

On the other hand, planarity of the hydrophobic part has been emphasized as an important factor in the mechanism of hydrotropic solubilization

To form a hydrotrope, an aromatic hydrocarbon solvent is sulfonated, creating an aromatic sulfonic acid. 

It is then neutralized with a base.

Additives may either increase or decrease the solubility of a solute in a given solvent. 

These salts that increase solubility are said to “salt in” the solute and those salts that decrease the solubility “salt out” the solute. 

The effect of an additive depends very much on the influence it has on the structure of water or its ability to compete with the solvent water molecules.

A convenient quantitation of the effect of a solute additive on the solubility of another solute may be obtained by the Setschetow equation

Hydrotropes are an important class of molecules that enhance the solubility of an otherwise insoluble or sparingly soluble solute in water. 

Besides this, hydrotropes are also known to self-assemble in aqueous solution and form aggregates. 

It is the hydrotrope aggregate that helps in solubilizing a solute molecule in water.

Applications

Hydrotropes are in use industrially and commercially in cleaning and personal care product formulations to allow more concentrated formulations of surfactants. 

Common products containing a hydrotropes include laundry detergents, surface cleaners, dishwashing detergents, liquid soaps, shampoos and conditioners.

They are coupling agents, used at concentrations from 0.1 to 15% to stabilize the formula, modify viscosity and cloud-point, reduce phase separation in low temperatures, and limit foaming.[9]

OTHER PRODUCTS OF ATAMAN CHEMICALS THAT MIGHT BE OF INTEREST:

Hydrotropes – Rheology Modifiers

Our range includes:

ELTESOL Hydrotropes

ELTESOL PSC 40

Potassium Cumenesulfonate (and) Sodium Cumenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SC 40

SodiumCumenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SC 93

Sodium Cumenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SC Pellets

Sodium Cumenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL ST 90

Sodium Toluenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL ST 93 Pellets

Sodium Toluenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SX 30

Sodium Xylenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SX 33

Sodium Xylenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SX 40

Sodium Xylenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SX 93

Sodium Xylenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

ELTESOL SX Pellets

Sodium Xylenesulfonate

Non-flammable, non-toxic alternative to solvents. Solubilizing, coupling and viscosity modifying agents increase the cloud point of non-ionics. Improved cold storage properties.

Hydrotropes

CAS No. NAME

12068-03-0 Toluene sulfonate, sodium salt

16106-44-8

30526-22-8 Toluene sulfonate, potassium salt

827-21-4

1300-72-7 Xylene sulfonate, sodium salt

30346-73-7 Xylene sulfonate, potassium salt

26447-10-9 Xylene sulfonate, ammonium salt

28088-63-3 Xylene sulfonate, calcium salt

28348-53-0

32073-22-6 Cumene sulfonate, sodium salt

37475-88-0 Cumene sulfonate, ammonium salt 

NANSA Dried LAS

Nansa Dried Linear Alkylbenzene Sulphonates

 

Our range includes:

NANSA HS 80/NPF

Sodium Dodecylbenzene Sulfonate (contains Citrates)

Primary Anionic Surfactant. Excellent foaming and detergency properties. Chemically stable in acidic and alkaline conditions. Ideal for toilet blocks production.

NANSA HS 85/NPF

Sodium Dodecylbenzene Sulfonate (contains Citrates)

Primary Anionic Surfactant. Excellent foaming and detergency properties. Chemically stable in acidic and alkaline conditions. Ideal for toilet blocks production.

NANSA HS 90/NPF

Sodium Dodecylbenzene Sulfonate (contains Citrates)

Primary Anionic Surfactant. Excellent foaming and detergency properties. Chemically stable in acidic and alkaline conditions. Ideal for toilet blocks production.

NANSA HS 80/S

Sodium Dodecylbenzene Sulfonate (contains Phosphate)

Primary Anionic Surfactant. Excellent foaming and detergency properties. Chemically stable in acidic and alkaline conditions.

NANSA HS 85/S

Sodium Dodecylbenzene Sulfonate (contains Phosphate)

Primary Anionic Surfactant. Excellent foaming and detergency properties. Chemically stable in acidic and alkaline conditions.

NANSA HS 90/S

Sodium Dodecylbenzene Sulfonate (contains Phosphate)

Primary Anionic Surfactant. Excellent foaming and detergency properties. Chemically stable in acidic and alkaline conditions.

NANSA Dried AOS

Nansa Dried Alpha Olefin Sulfonate

 

Our range includes:

NANSA LSS 480/H

Sodium C14-16 Olefin Sulfonate

Primary anionic surfactant. Excellent foaming and detergency. Hard water and electrolyte tolerant. Chemically stable in acidic and alkaline conditions.

NANSA LSS 495/H

Sodium C14-16 Olefin Sulfonate

Primary anionic surfactant. Excellent foaming and detergency. Hard water and electrolyte tolerant. Chemically stable in acidic and alkaline conditions.

NANSA LSS 495/V

Sodium C14-16 Olefin Sulfonate

Primary anionic surfactant. Excellent foaming and detergency. Hard water and electrolyte tolerant. Chemically stable in acidic and alkaline conditions.

Optimized physical form for an improved product handling.

EMPICOL Dried FAS

Empicol Dried Fatty Alcohol Sulphates

Our range includes:

EMPICOL 0045/B

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL CZ/N

Sodium Coco Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL CZV/N

Sodium Coco Sulfate, in the form of needles

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LX/B

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL LX/B/MB

Sodium Lauryl Sulfate

Mass Balance RSPO certified. Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL LX/N

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LXV/B

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL LXV/N

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LZ/B

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL LZ/N

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LZ/N/MB

Sodium Lauryl Sulfate

Mass Balance RSPO certified. Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LZV/B

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL LZV/B/MB

Sodium Lauryl Sulfate

Mass Balance RSPO certified. Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties.

EMPICOL LZV/BE

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Optimized physical form for an improved product handling.

EMPICOL LZV/BEP

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Optimized physical form for an improved product handling.

EMPICOL LZV/N

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LZV/N/MB

Sodium Lauryl Sulfate

Mass Balance RSPO certified. Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Low free alkalinity level.

EMPICOL LZV/NEP

Sodium Lauryl Sulfate

Primary anionic surfactant. Very good foaming and detergency especially in soft water. Good emulsifying properties. Optimized physical form for an improved product handling.

Primary Surfactants

Primary surfactants are key ingredients in both Home Care and I&I formulations.

Our range includes:

Dried Surfactants

EMPICOL Alkyl Ether Sulfates

EMPICOL EAC 70

Ammonium Laureth-3 Sulfate

Foaming (flash-foam stable), cleaning and emulsifying agent. Hard

water tolerant. Leaves less residue on surfaces. Formulating range of pH: neutral and slightly acidic.

EMPICOL EGC 70

Magnesium Laureth-3 Sulfate

Foaming (flash-foam stable), cleaning and emulsifying agent. Hard

water tolerant. Has greater oil solubility than Na salt. Less irritant than the correspondent Na salt. Better viscosity response and better foam stability

than Na salt. Formulating range of pH: neutral and slightly acidic.

 

EMPIMIN Alkyl Ether Sulfates

EMPIMIN LSM30

Sodium C9-11 Pareth-2 Sulfate

High foaming (flash-foam), good compatibility with high electrolytes levels. Compatible with alkaline systems. Preservative: Methylisothiazolinone (and) Benzylisothiazolinone.

 

EMPICOL Alkyl Sulfates

EMPICOL 0335/X

Sodium C10-12 Alkyl Sulfate

High foaming (flash-foam), Good compatibility with high electrolytes levels. Compatible with alkaline systems. Preservative: Methylchloroisothiazolinone (and) Methylisothiazolinone.

Naturally derived grade may also be available upon request.

EMPICOL 0585/A

Sodium 2-Ethylhexyl Sulfate

Low foaming. Good wetting properties also in alkaline conditions.

Good compatibility with high electrolytes levels. Compatible with alkaline systems. Preservative: Methylisothiazolinone (and) Benzylisothiazolinone.

EMPICOL 0585/U

Sodium 2-EthylhexylSulfate

Low foaming. Good wetting properties also in alkaline conditions. Good compatibility with high electrolytes levels. Compatible with alkaline systems.

EMPICOL 0758

Sodium Decyl Sulfate

High foaming (flash-foam). Good compatibility with high electrolytes levels. Compatible with alkaline systems.

Naturally derived grade may also be available upon request.

EMPICOL 0775/55

Sodium Lauryl Sulfate (and) Sodium Tallow Sulfate

Foaming (flash-foam) Ideal for the manufacture of hand-cleaning pastes at a pH close to that of the skin. This product is based on a selected blend of fatty alcohols which provide a higher viscosity build in aqueous formulations.

EMPICOL 0775/55/MB

Sodium Lauryl Sulfate (and) Sodium Tallow Sulfate

Mass Balance RSPO certified. Foaming (flash-foam) Ideal for the manufacture of hand-cleaning pastes at a pH close to that of the skin. This product is based on a selected blend of fatty alcohols which provide a higher viscosity build in aqueous formulations.

EMPICOL AL 25/EX

Ammonium Lauryl Sulfate

High foaming (flash-foam). Better viscosity esponse than sodium salt. Easier to rinse than sodium salt. pH formulating range: neutral and slightly acidic.

Preservative: Methylchloroisothiazolinone (and) Methylisothiazolinone.

EMPICOL AL 70

Ammonium Lauryl Sulfate

High foaming (flash-foam). Better viscosity esponse than sodium salt. Easier to rinse than sodium salt. pH formulating range: neutral and slightly acidic.

EMPICOL LN9

Sodium Nonyl Sulfate

High foaming (flash-foam). Good compatibility with high electrolytes levels. Compatible with alkaline systems.

EMPICOL LQ 33/TX

MEA Lauryl Sulfate

High foaming (flash-foam). Better viscosity esponse than sodium salt. Easier to rinse than sodium salt. pH formulating range: neutral and slightly acidic. Preservative: Methylchloroisothiazolinone (and) Methylisothiazolinone.

EMPICOL TL 40/X

TEA Lauryl Sulfate

High foaming (flash-foam). Better viscosity esponse than sodium salt. Easier to rinse than sodium salt. pH formulating range: neutral and slightly acidic. Preservative: Methylchloroisothiazolinone (and) Methylisothiazolinone.

 

NANSA Olefin Sulfonates

NANSA LSS 38/AS

Sodium C14-16 Olefin Sulfonate

Excellent foaming and detergency. Hard water and electrolyte tolerant.

Chemically stable in acidic and alkaline conditions. Free from 1,4-dioxane and EO. Preservative: 2-Bromo-2-Nitropropane-1,3-Diol.

NANSA LSS 38/U

Sodium C14-16 Olefin Sulfonate

Excellent foaming and detergency properties. Hard water and electrolyte tolerant. Chemically stable in acidic and alkaline conditions. Free from 1,4-dioxane and EO.

NANSA Alkylbenzene Sulfonates

NANSA SS 55/I

Sodium Dodecylbenzene Sulfonate

The work-horse of many household detergents. High foaming profile. The concentration represents the best compromise between the highest active/ ease of handling. Chemically stable in acidic and alkaline conditions.

Preservative: Methylisothiazolinone (and) Benzylisothiazolinone.

NANSA Fatty acid salts

NANSA PC 38/F

Potassium Cocoate

Good detergent properties. Low foam profile/ foam contoller in hard water.

Secondary Surfactants

By combining a primary with a secondary surfactant, you can achieve properties of a formulation that is difficult to do when using a primary surfactant alone.

Our range includes:

EMPIGEN Alkyl and Alkylamidopropyl Betaines

EMPIGEN BB

Lauryl Betaine

Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Useful thickening properties. Chemically and physically stable over a wide pH range.

EMPIGEN BB/HP

Lauryl Betaine (Low salt)

Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Chemically and physically stable over a wide pH range. NaCl content is below 0,5%. Compatible with electrolyte sensitive ingredients.

EMPIGEN BS/FE

Cocamidopropyl Betaine

Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Useful thickening properties. Chemically and physically stable over a wide pH range. Methanol and glycerol free.

EMPIGEN BS/FE/MB

Cocamidopropyl Betaine

Mass Balance RSPO certified. Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Useful thickening properties. Chemically and physically stable over a wide pH range. Methanol and glycerol free.

EMPIGEN BS/H50

Cocamidopropyl Betaine

Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Useful thickening properties. Chemically and physically stable over a wide pH range. Higher CAPB content. Free from methanol, glycerol and additives that may give undesired side effects during formulation work.

EMPIGEN BS/H50/MB

Cocamidopropyl Betaine

Mass Balance RSPO certified. Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Useful thickening properties. Chemically and physically stable over a wide pH range. Higher CAPB content. Free from methanol, glycerol and additives that may give undesired side effects during formulation work.

EMPIGEN BS/HI

Cocamidopropyl Betaine

Amphoteric co-surfactant. Compatible with anionics, non-ionics and cationics. Efficient foam booster and stabilizer. Good tolerance to hard water and soap. Useful thickening properties. Chemically and physically stable over a wide pH range. Methanol and glycerol free. Neutral pH. Preservative: Methylisothiazolinone (and) Benzylisothiazolinone.

 

EMPIGEN Alkyl Amphoacetates and Amphodiacetates

EMPIGEN CDL 30/J/35

Sodium Lauroamphoacetate

Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

EMPIGEN CDL 60/P

Sodium Lauroamphoacetate

Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

EMPIGEN CDR 60

Sodium Cocoamphoacetate

Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

EMPIGEN 5151

Disodium Cocoamphodiacetate

Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

EMPIGEN 5151/MB

Disodium Cocoamphodiacetate

Mass Balance RSPO certified. Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

EMPIGEN CDR 2M

Sodium Cocoamphoacetate (and) Disodium Cocoamphodiacetate

Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

EMPIGEN CDR 2M/MB

Sodium Cocoamphoacetate (and) Disodium Cocoamphodiacetate

Mass Balance RSPO certified. Amphoteric co-surfactant. Compatible with anionic, non-ionic and cationic surfactants. Good quality of foam even with soap and hard water. Outstanding mildness. Potential to form ion-pair complexes and increase the performance of cationic surfactants. Foam profile and viscosity response are influenced by pH.

 

EMPICOL Alkyl Ether Carboxylic Acids and Salts

EMPICOL CVE

Capryleth-6 Carboxylic Acid

Anionic surfactant. Low foaming. Good wetting agent. Highly compatible with electrolytes, oxidizing agents, acid and alkali. Excellent lime scum removal properties.

EMPICOL CBJ

Laureth-11 Carboxylic Acid

Anionic surfactant. High volume and high-quality foam profile also in hard water. Good detergency. Good dermatology. Highly compatible with electrolytes, oxidizing agents, acid and alkali. Hydrotropic effect. Excellent lime scum removal properties.

EMPICOL CED 5

Laureth-5 Carboxylic Acid

Anionic surfactant. High volume and high-quality foam profile also in hard water. Good detergency. Good dermatology. Highly compatible with electrolytes, oxidizing agents, acid and alkali. Excellent lime soap dispersing properties.

EMPICOL CED 5S

Sodium Laureth-5 Carboxylate

Anionic surfactant. High volume and high-quality foam profile also in hard water. Good detergency. Good dermatology. Highly compatible with electrolytes, oxidizing agents, acid and alkali. Excellent lime soap dispersing properties. Preservative: Methylchloroisothiazolinone (and)

Methylisothiazolinone.

 

EMPICOL Alkyl Ether Sulfosuccinates and EMPIMIN Alkyl Sulfosuccinates

EMPICOL SDD/Y

Disodium Laureth-3 Sulfosuccinate

Anionic surfactant is exceptionally mild to skin. Used in conjunction with anionic, nonionic and amphoteric surfactants. Good foaming characteristics. Formulating range of pH 5-8. Good tolerance to hard water. Low salt viscosity response. Preservative: Methylchloroisothiazolinone (and) Methylisothiazolinone.

EMPIMIN OP 70

Diethylhexyl Sodium Sulfosuccinate (and) Propylene Glycol

Anionic surfactant with excellent wetting over abroad temperature range. Excellent emulsification properties. Excellent dispersing effect both in aqueous and non-aqueous dispersions. Good foaming characteristics. Hydrotropic effect. Anti-fog properties on glass and acrylates.

EMPIMIN OT

Diethylhexyl Sodium Sulfosuccinate (and) Ethanol

Anionic surfactant with excellent wetting over abroad temperature range. Excellent emulsification properties. Excellent dispersing effect both in aqueous and non-aqueous dispersions. Good foaming characteristics. Hydrotropic effect. Anti-fog properties on glass and acrylates.

 

EMPIGEN Amine Oxides

EMPIGEN OB

Lauramine Oxide

Cationic surfactant in acidic conditions. Non-ionic in neutral and alkaline systems. A combination with primary anionic surfactants gives excellent detergency. Good thickening and foam boosting properties. Reduces potential irritation of anionics. Chemically stable to acid, alkali and oxidants.

EMPIGEN OB/MB

Lauramine Oxide

Mass Balance RSPO certified. Cationic surfactant in acidic conditions. Non-ionic in neutral and alkaline systems. A combination with primary anionic surfactants gives excellent detergency. Good thickening and foam boosting properties. Reduces potential irritation of anionics. Chemically stable to acid, alkali and oxidants.

EMPIGEN OD

C12-18 Alkyldimethylamine Oxide

Cationic surfactant in acidic conditions. Non-ionic in neutral and alkaline systems. A combination with primary anionic surfactants gives excellent detergency. Good thickening and foam boosting properties. Reduces potential irritation of anionics. Chemically stable to acid, alkali and oxidants. Ideal for thickened bleach systems.

EMPIGEN OD/MB

C12-18 Alkyldimethylamine Oxide

Mass Balance RSPO certified. Cationic surfactant in acidic conditions. Non-ionic in neutral and alkaline systems. A combination with primary anionic surfactants gives excellent detergency. Good thickening and foam boosting properties. Reduces potential irritation of anionics. Chemically stable to acid, alkali and oxidants. Ideal for thickened bleach systems.

EMPIGEN OH 25

Myristamine Oxide

Cationic surfactant in acidic conditions. Non-ionic in neutral and alkaline systems. Combination with primary anionic surfactants gives excellent detergency. Good thickening and foam boosting properties. Reduces potential irritation of anionics. Chemically stable to acid, alkali and oxidants.

EMPIGEN OS/A

Cocamidopropyl Amine Oxide

Cationic surfactant in acidic conditions. Non-ionic in neutral and alkaline systems. Combination with primary anionic surfactants gives excellent detergency. Good thickening and foam boosting properties. Reduces potential irritation of anionics. Chemically stable to acid and alkali.

Solubilizers – Emulsifiers

Our range includes:

EMPILAN Ethoxylated Alcohols

EMPILAN KA 5

Deceth-5

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with excellent wetting and foaming power. Ideal for surface cleaning.

Naturally derived grade may also be available upon request.

EMPILAN KA 5/90

Deceth-5

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with excellent wetting and foaming power. Ideal for surface cleaning. Improved cold storage properties.

Naturally derived grade may also be available upon request.

EMPILAN KCL 7

C12-15 Pareth-7

Non-ionic surfactant. Stable over a wide range of pH. The specific alkyl chain and the mid-rang ethoxylation degree give very good wetting and detergency. Work-horses of surface cleaners, laundry, dish wash.

EMPILAN KCL 7/90

C12-15 Pareth-7

Non-ionic surfactant. Stable over a wide range of pH. The specific alkyl chain and the mid-rang ethoxylation degree give very good wetting and detergency. Work-horses of surface cleaners, laundry, dish wash. Improved cold storage properties.

EMPILAN KCL 9/85

C12-15 Pareth-9

Non-ionic surfactant. Stable over a wide range of pH. The specific alkyl chain and the mid-rang ethoxylation degree give good wetting and

detergency. Work-horses of surface cleaners, laundry, dish wash. Improved cold storage properties.

EMPILAN KCL 11

C12-15 Pareth-11

Non-ionic surfactant. Stable over a wide range of pH. The specific alkyl chain and the mid-rang ethoxylation degree give good wetting and

detergency. Work-horses of surface cleaners, laundry, dish wash. Useful to solubilize a wide range of perfumes.

EMPILAN KCL 11/90

C12-15 Pareth-11

Non-ionic surfactant. Stable over a wide range of pH. The specific alkyl chain and the mid-rang ethoxylation degree give good wetting and

detergency. Work-horses of surface cleaners, laundry, dish wash. Useful to solubilize a wide range of perfumes. Improved cold storage properties.

EMPILAN KI 6

Trideceth-6

Non-ionic surfactant. Stable over a wide range of pH. Highly branched iso-alcohol ethoxylate with excellent emulsification/wetting poperties. Low foam profile.

EMPILAN KI 6.5

Trideceth-7

Non-ionic surfactant. Stable over a wide range of pH. Highly branched iso-alcohol ethoxylate with excellent emulsification/wetting poperties. Medium foam profile.

EMPILAN KI 8

Trideceth-8

Non-ionic surfactant. Stable over a wide range of pH. Highly branched iso-alcohol ethoxylate with excellent emulsification/wetting poperties. Medium to high foam profile.

EMPILAN KR 2.5

C9-11 Pareth-3

Non-ionic surfactant. Stable over a wide range C9-11 of pH. Poor aqueous solubility. Used as anti-foam and viscosity builder.

EMPILAN KR 5

C9-11 Pareth-5

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with very good wetting and excellent foaming power. Ideal for surface cleaning.

EMPILAN KR 6

C9-11 Pareth-6

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with very good wetting and excellent foaming power. Ideal for surface cleaning.

EMPILAN KR 6/90

C9-11 Pareth-6

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with very good wetting and excellent foaming power. Ideal for surface cleaning. Improved cold storage properties.

EMPILAN KR 8

C9-11 Pareth-8

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with good wetting and

foaming power. Ideal for surface cleaning.

EMPILAN KT 7/80

Deceth-7

Non-ionic surfactant. Stable over a wide range of pH. Shorter alkyl chain gives greater solubility and tolerance to electrolyte, with good wetting and

excellent foaming power. Ideal for surface cleaning. Improved cold storage properties.

EMPILAN ME10-CN

Coconut Methyl Ester Ethoxylate (10 EO)

Non-ionic surfactant. Excellent emulsifier an detergent. Low toxicity (not classified also accoding the CLP). Lower foaming profile compaed to

conventional fatty alcohol ethoxylates. It doesn’t meet gel phases when diluted in water. Ideal for super-concentrated formulations.

EMPILAN Fatty Acid Alkanolamides

EMPILAN 2502

Cocamide DEA

Non-ionic surfactant. Thickening agent. Used to boost stability and volume of foam also in the presence of hard water and soap. Useful to solubilize a wide range of perfumes and non-polar compounds. Contains glycerol.

EMPILAN 2502/MB

Cocamide DEA

Mass Balance RSPO certified. Non-ionic surfactant. Thickening agent. Used to boost stability and volume of foam also in presence of hard water and

soap. Useful to solubilize a wide range of perfumes and non-polar compounds. Contains glycerol.

EMPILAN CIS

Cocamide MIPA

Non-ionic surfactant. Thickening agent. Used to boost stability and volume of foam also in presence of hard water and soap. Useful to solubilize a wide range of perfumes and non-polar compounds.

EMPILAN CME/T

Cocamide MEA

Non-ionic surfactant. Thickening agent. Used to boost stability and volume of foam also in the presence of hard water and soap. Useful to solubilize a wide range of perfumes and non-polar compounds. Contains glycerol.

Chelating Agents

ENVIOMET EDDS

ENVIOMETTM C140

Trisodium Ethylenediamine Disuccinate

Unique readily biodegradable and Eco-label approved chelating agent particularly effective at chelating transition metals in the presence of Calcium and Magnesium. Application: stain removal, Peroxide/Peracetic acid stabilization, dye and fabric protection, biocide potentiator, removal of

transition metals from surfaces.

ENVIOMET  C280

Ethylenediamine Disuccinic Acid

Free acid form. Unique readily biodegradable and Eco-label approved chelating agent particularly effective at chelating transition metals in the presence of Calcium and Magnesium. Application: stain removal, Peroxide/Peracetic acid stabilization, dye and fabric protection, biocide potentiator, removal of transition metals from surfaces.

Specialty Cationics

Our range includes:

EMPIGEN Anti-bacterial and Softening Agents

EMPIGEN BAC 50

Benzalkonium Chloride

Readily biodegradable cationic surfactant with biocidal properties. Compatible with amphoteric and nonionic surfactants. Incompatible with anionic surfactants. Readily soluble in water, lower alcohols, glycols and glycol ethers. Stable both in acidic and alkaline media. Best efficacy around pH 9. Used in cooling water and swimming pools. Very effective against gram-positive bacteria.

EMPIGEN BAC 80

BenzalkoniumChloride (and)glycol ether

Readily biodegradable cationic surfactant with biocidal properties. Compatible with amphoteric and nonionic surfactants. Incompatible with anionic surfactants. Readily soluble in water, lower alcohols, glycols and glycol ethers. Stable both in acidic and alkaline media. Best efficacy around pH 9. Used in cooling water and swimming pools. Very effective against gram-positive bacteria.

EMPIGEN HBC 40

Hydroxyethyl Laurdimonium Chloride

A readily biodegradable cationic surfactant that is compatible with anionics. Improves emulsification, detergency, thickening and foaming. Optimizes surface tension reduction. Enables adhesion to some surfaces. Gives some conditioning behavior.

Please check www.atamankimya.com for more products

Explore: