MERGAL BIT 20
MERGAL BIT 20 is an effective broad-spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria, yeast, and fungi in aqueous based formulations.
Mergal BIT 20 by Troy Corporation acts as a biocide. Based on BIT chemistry and compatible over a wide pH range.
Mergal BIT 20 is heat stable and formaldehyde-free. Mergal® BIT20 offers high pH formulations and is compatible with amines as well as amine containing additives.
Mergal BIT 20 is designed to inhibit the growth of microorganisms such as bacteria, yeast, and fungi in aqueous based formulations.
Product Type: Biocides > Biocides, In-can Preservatives > BIT
MERGAL BIT20
For Industrial Use Only As A Microbiostat Preservative Intended To Protect Adhesives, Building And Construction Compositions, Emulsion Paint And Coatings, Inks, Lattices, Leather Processing Solutions, Metalworking Fluids, Mineral Slurries And Dispersions, Oil Recovery Systems, Paper Coatings, Pesticide Formulations, Polymer Emulsions, Textile Spin-Finish And Coatings, Car Care Products Including Car Washes, Car Waxes And Silicone Emulsions, Home Care Cleaning Products Including Floor Cleaners, Floor Waxes, Floor Polishes And Surface Cleaners, Laundry Additives Including Liquid Laundry Detergents, Fabric Softeners And Stain Removers.
ACTIVE INGREDIENT: ………………………………… % Weight
1,2-Benzisothiazolin-3(2H)-one ……………………….. 19.18%
INERT INGREDIENTS ……………………………………… 80.82%
TOTAL …………………………………………………………. 100.00%
APPLICATION RATE: Mergal BIT20 is an effective preservative for most aqueous applications.
Mergal®BIT20 is used in aqueous or water-containing products and systems to control growth of bacteria and fungi.
Use rates are in percentage by weight and refer to the product Mergal®BIT20.
In order to determine the most cost effective use level for Mergal BIT20 in a given use, field trials are suggested.
GENERAL RECOMMENDATIONS: For protection against bacterial attack, a concentration within the range of 0.02 – 0.35% of this product is almost invariably sufficient.
The control of mold growth, particularly on paste products of high solids content, may occasionally demand dosages above 0.25%.
In dilute fluid systems, spoilage is usually controlled with dosages not greater than 0.09%.
The use rate is 0.05 – 0.25% wt/wt in the following products: Adhesives, Building and Construction Compositions, Emulsion Paint and Coatings, Inks, Lattices, Leather Processing Solutions, Metalworking Fluids, Mineral Slurries and Dispersions, Paper Coatings, Pesticide Formulations, Polymer Emulsions, Textile Spin-Finish and Coatings.
Mergal BIT20 is approved for adhesives used in food packaging and food contact paper and paperboard coatings. Use of Mergal BIT20 must not exceed 0.21 mg/in2 (0.0326 mg/cm2) of finished paper and paperboard intended for contact with dry foods and 0.11 mg/in2 (0.0168 mg/cm2 ) of finished paper and paperboard intended for contact with aqueous and fatty foods.
Oil Recovery Systems: Drilling fluids, packer fluids, completion fluids:
Polysaccharide fluid loss control agents and thickeners such as starch, guar, and xanthan gum at a use rate of 0.05 – 0.15% on fluid weight or 1.5 – 4.5% on the dry polysaccharide weight.
Subsurface injection waters such as polymer and micellar/polymer waterfloods: Thickeners such as polysaccharides and xanthan gum at a use rate of 0.05 – 0.15% on the solution weight. .
1,2-Benzisothiazol-3(2H)-one
2634-33-5
1,2-Benzisothiazolin-3-one
1,2-benzothiazol-3-one
benzisothiazolone
Benzo[d]isothiazol-3(2H)-one
benzisothiazolinone
Benzo[d]isothiazol-3-one
Proxel
1,2-Benzisothiazoline-3-one
Proxel PL
1,2-BENZISOTHIAZOL-3-ONE
Nipacide BIT
Proxel AB
Benzo[d]isothiazol-3-ol
2,3-dihydro-1,2-benzothiazol-3-one
Proxel XL 2
benzoisothiazol-3-one
1,2-benzoisothiazolin-3-one
1,2-Benzisothiazolone
C7H5NOS
UNII-HRA0F1A4R3
3-Hydroxy-1,2-benzisothiazole
IPX
CHEBI:167099
HRA0F1A4R3
1,2-Benzoisothiazoline-3-one
2,3-dihydro-3-oxo-1,2-benzisothiazole
MLS-0254244.0001
Benzo(d)isothiazol-3(2H)-one
Benzisothiazolin-3-one
Caswell No. 079A
Caswell No. 513A
Benzocil
1,2-benzisothiazolinone
Acticide BIT
Canguard BIT
Denicide BIT
Proxel BD
Proxel CF
Proxel TN
Proxel XL
Proxel BDN
Proxel GXL
Proxel Ultra 5
San-aibac AP
Proxel LV-S
Proxel Press Paste
Apizas AP-DS
Acticide BW 20
Bestcide 200K
Nipacide BIT 20
Parmetol B 70
Parmetol D 11
Proxel GXL(S)
Proxel HL 2
Nuosept 485
Nuosept 491
Nuosept 495
Topcide 600
XBINX
CCRIS 6369
Denicide BIT 20N
Koralone B 119
Nipacide BIT 10W
Preventol BIT 20D
Proxel BD 20
Proxel Press Paste D
Troysan 1050
Bioban BIT 20DPG
1,2-benzisothiazole-3(2h)-one
benzisothiazoline-3-one
Canguard BIT 20DPG
EINECS 220-120-9
SD 202 (bactericide)
Canguard Ultra BIT 20LE
EPA Pesticide Chemical Code 098901
1,2-Benzoisothiazol-3-one
BIT 10W
BIT 20
2-Thiobenzimide
2,3-Dihydrobenzisothiazol-3-one
SD 202
1,2-BENZISOTHAZOL-3(2H)-ONE
1,2-Benzothiazolinone
PubChem15685
Benzisothiazolone (BIT)
ACMC-209u7v
Epitope ID:115004
Benzisothiazol-3(2H)-one