TYLOSE MHF 10015 P4
Technical Data Sheet of Tylose MHF 10015 P4
EC / List no.: 618-528-0
CAS no.: 9032-42-2
Composition and information on ingredients of Tylose MHF 10015 P4
Comments : A registration number is not available for Tylose MHF 10015 P4 as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006.
Name and CAS-No. of the Ingredients
Cellulose methyl ether, 2-hydroxyethyl ether, modified 9032-42-2: > 85 %
Other substances (not contributing to the classification of this product): – < 15 %
Recommended use of TYLOSE MHF 10015 P4 :
Rheological Additive
Special applications
Coating material
Additive for mortar
Substance names and other identifiers
Regulatory process names
Cellulose, 2-hydroxyethyl methyl ether
Hydroxyethyl methyl cellulose
hydroxyethylmethylcellulose
Hymetellose
Methyl hydroxyethyl cellulose
IUPAC names
2-Hydroxyethyl methyl cellulose
CELLULOSE, 2-HYDROXYETHYL METHYL ETHER
Cellulose, 2-hydroxyethyl methyl ether
ethane-1,2-diol;(2S,3R,4R,5S,6R)-2-(hydroxymethyl)-6-[(2S,3R,4S,5S,6S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol;(2S,3S,4R,5S,6S)-2,3,4-trimethoxy-6-(methoxymethyl)-5-[(2R,3S,4R,5S,6S)-3,4,5-trimethoxy-6-(methoxymethyl)oxan-2-yl]oxyoxane
Hidroxyethyl Methyl Cellulose Ether
hydroxyethylmethylcellulose
Methyl 2-Hydroxyethyl Cellulose
Methyl 2-hydroxyethyl cellulose
methyl 2-hydroxyethyl cellulose
methyl 2-hydroxyethylcellulose
Methyl hydroxyethyl cellulose
Methyl Hydroxyethylcellulose
APPLICATION of Tylose MHF 10015 P4: CONSTRUCTION
Tylose MHF 10015 P4
Product properties
Tylose MHF 10015 P4 is a medium viscosity, modified methyl hydroxyethyl cellulose.
Tylose MH 10015 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification.
Tylose MH 10015 P4 provides fast consistency development, very high sag resistance and water demand, moderate water retention and influence on cement hydration, and high heat stability.
This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives.
Typical data
Viscosity *: 8000-15000 mPas
Moisture, as packed: max. 6 %
NaCl content: max. 1.5 %
Particle size: fine powder
* Brookfield RV, 1.9% water, 20°C, 20° dH (German hardness)
Tylose MHF 10015 P4 Recommended fields of application: Tile adhesives, premium
Application performance of Tylose MHF 10015 P4
Consistency development: fast
Final consistency: very high
Sag resistance: very high
Water demand: very high
Water retention: moderate
Cement retardation: moderate
Heat stability: high
Application properties
Tylose MHF 10015 P4 is mainly recommended for premium cement based tile adhesives.
Tylose MHF 10015 P4 ensures sufficient water retention and gives very good adhesion strength.
The special modification of Tylose MHF 10015 P4 increases the thickening effect, improves the workability and leads to outstanding slip resistance and extra-long open time.
Physical and chemical properties of Tylose MHF 10015 P4
Physical state : Solid
Appearance : Powder.
Colour : whitish
Odour : odourless
Odour threshold : No data available
pH : 6 – 8 10g/l
Relative evaporation rate (butylacetate=1) : Not specifically applicable
Melting point / Freezing point : Melting point: Not specifically applicable
Freezing point: Not specifically applicable
Boiling point : Not specifically applicable
Flash point : Not specifically applicable
Auto-ignition temperature : > 170 °C
Flammability (solid, gas) : No data available
Vapour pressure : Vapour pressure: Not specifically applicable
Vapour pressure at 50 °C: Not specifically applicable
Relative density : Relative vapour density at 20 °C: Not specifically applicable
Density : Density: 1.1 – 1.5 g/cm³ 20 °C
Relative density: Not specifically applicable
Solubility : Water: > 10 g/l @ 20°C
Log Pow : < 0
Viscosity, kinematic : Not specifically applicable
Viscosity, dynamic : Not specifically applicable
Explosive properties : Product is not explosive. Dust may form explosive mixture in air.
Explosive limits : No data available
Minimum ignition energy : > 10 mJ
Fat solubility : No data available
Conbustion class : 5
Smoldering temperature : >450 °C
pmax : 10 bar
Dust explosion category : ST1
KSt : < 200 bar*m/s
Ignition temperature : > 400 °C
Packaging, storage and safety instructions
This Tylose type is supplied in multilayer paper bags with polyethylene intermediate layer and/or in big bags.
When kept in clean, dry conditions in its original packing, Tylose can be stored for a long time.
During storage a slow loss of viscosity can be measured. Tylose absorbs water from moist air.
Once opened, container must be resealed and kept tightly closed.
Like all fine particle organic substances, cellulose ethers constitute a dust explosion hazard.
Dust formation and deposits must be kept to a minimum so that no ignitable dust/air mixtures can form.
Ignition sources such as naked flames, hot surfaces, sparks and static electricity should be avoided.
Please refer to Safety Data Sheet (SDS) for more information.