Orgal PR 667

Orgal PR 667

Orgal PR 667, having extremely small particle size, is especially suitable for the production of aqueous high penetration primers on substrates as plaster, concrete and cement.  

ORGAL PR 667: Styrene Acrylic Copolymer

Orgal PR 667 is a low viscosity, styrene acrylic copolymer with very fine particles. 

Orgal PR 667  provides slightly tacky, elastic and clear films. 

Orgal PR 667  exhibits excellent penetration, durability and adhesion properties. 

Orgal PR 667  is suitable to produce aqueous high penetration primers and wood stains. 

Orgal PR 667  provides high resistance to alkaline media. 

Orgal PR 667 is compatible with gypsum and gypsum boards. 

The maximum shelf life of Orgal PR 667 is 12 months.

Product Type: Acrylics & Acrylic Copolymers > Styrene / Acrylic Copolymers > Emulsions / Dispersions

Chemical Composition: Styrene acrylic copolymer

Orgal PR 667 is a styrene acrylic copolymer with very fine particles, developed as a primer for mineral substrates or formulations for impregnating wood stains. 

Such low particle size emulsions are also referred to as “Hydrosols”. Orgal PR 667 is a Hydrosol.

Orgal PR 667 is supplied as a low viscosity polymer with a bluish to clear appearance. 

The polymer dries to give a slightly tacky, elastic and clear film.

Due to the very small particle size, Orgal PR 667 has excellent penetration and adhesion properties.

Product Spectrum

Product Name : ORGAL PR 667

Chemical Composition : S/AC

Total Solids (%±1) : 34

pH : 8.0-8.0

Viscosity (mPa.s max) : 100

MFFT (°C) :0

Tg (°C) : 1

Application Areas

Wood Stains : Excellent

APPLICATION PROPERTIES

Orgal PR 667, having extremely small particle size, is especially suitable for the production of aqueous high penetration primers on substrates as plaster, concrete and asbestos cement. 

The penetration power increases with decreasing solid contents. 

However the reinforcing effect increases with the dry binder amount. 

An optimum dilution should be decided by pretests. 

Small quantities of surfactants would help the penetration power. 

Orgal PR 667 is highly resistant to alkaline media thus making it compatible with gypsum and gypsum board.

Excellent penetration

Excellent adhesion

Excellent durability

PRODUCT HANDLING – STORAGE – SHELFLIFE

To ensure safe storage of this emulsion, containers should be well sealed to prevent the water evaporation and skin forming. 

The emulsion must be stored between 5-25°C for a maximum of 12 months and freezing must be avoided.

Protect from freezing