TROYSAN V450

Table of Contents

TROYSAN V450

TROYSAN V450 is a broad-spectrum preservative that protects water-based paints, coatings, wood preservatives, stains, leather intermediates, functional fluids and other materials against a wide variety of microorganisms (especially yeast, surface mold, staining fungi and mildew).

ACTIVE INGREDIENT: ………………………………………. % Weight

2-n-octyl-4-isothiazolin-3-one……………………………………45.0%

INERT INGREDIENTS……………………………………………..55.0%

TOTAL………………………………………………………………100.0% 

TROYSAN V450 is Industrial Preservative for Use in Aqueous Adhesives, WallPaper Pastes and Tackifiers, Building Materials, Coatings, Emulsions, Polymers and Polyurethanes, Hydraulic Fluids, Metalworking Fluids, Textiles, Laundry, Fabric, Fabric Surfaces, Vinyl and Plastics

TROYSAN V450 is industrial Preservative and Mildewcide for the Protection of Wood Coatings and Wood Coating Solutions including Sapstain Control 

Hydraulic Fluids: For use as a preservative in the manufacture and use of soluble oils, high water-based and emulsion hydraulic fluids. 

TROYSAN V45O should be applied directly into the hydraulic concentrate or use dilution hydraulic fluid using a metering pump and uniformly dispersed through the fluid. 

Highly contaminated systems should be cleaned prior to the application of TROYSAN V45O.

For fluid concentrates add sufficient TROYSAN V45O to ensure the end-use dilution fluid will contain 55-165 ppm of product (25-73 ppm active ingredient)

For use-dilution fluids add 0.47-1.44 pounds of TROYSAN V45O per 1000 gallons of emulsion. 

Repeat until microbial control is achieved. 

For maintenance use, add 0.09-0.58 pounds of TROYSAN V45O per 1000 gallons of emulsion every 4-6 weeks.

This will provide 5-30 ppm active ingredient to the emulsion. 

More frequent dosing may be necessary depending on the degree of microbial contamination and system design. [Hydraulic Fluids are approved for use in the State of California for control of fungi only]

Metalworking Fluids: TROYSAN V45O is recommended for fungal control in the manufacture and use of soluble, synthetic and semi-synthetic metalworking fluids.

TROYSAN V45O can be applied using a metering pump for uniform application to the fluid.

For fluid concentrates add TROYSAN V45O at a rate that will provide 55-165 ppm of product (25-73 ppm active ingredient) in the diluted metalworking fluid.

Use-Dilution Fluids: For noticeably fouled systems use 0.47-1.44 pounds of TROYSAN V45O per 1000 gallons of fluid. 

Repeat until control is achieved. 

For maintenance use add 0.09-0.58 pounds of TROYSAN V45O per 1000 gallons of fluid ever 4-6 weeks.

Higher dose rates and/or frequency of use may be required depending on the degree of microbial contamination and system design.

Textiles**, Laundry Fabric** and Fabric Surfaces**: For use in prevention of bacterial and fungal growth in the presence of moisture in and on fibers, textiles and fabrics including carpets and backing materials.. 

Not for use in carpet fibers. For use as a preservative, apply TROYSAN V45O at a rate of 0.1-0.25% by weight. [**Textiles, Laundry Fabric and Fabric Surfaces are not approved for use in State of California**]

Vinyl** and Plastics**: For use as a preservative in PVC flooring and wall covering, interior automotive parts, refrigerator gaskets, shower curtains, mattress covers, rain wear, boots, PVC slippers and gloves. 

Use TROYSAN V45O at a rate of 0.1-0.5% based on the total weight of the formulation (equates to 0.05-0.5% based on platisol).

TROYSAN V45O can also be used for the preservation of other plastic articles such as automotive tops and external trim, tarpaulins, tents, awnings, indoor/outdoor carpeting backing, garden hoses, pool and pond liners, marine upholstery, roof liners, PVC tiles and fibers. 

It is used at a rate of 0.15-0.75% based on the total weight of the formulation (equates to 4.35 lbs./1000 lbs. of compound).

TROYSAN V45O is best added to the plasticizer in the production process. 

Explore: