Tylose MHS 30027 P6
Tylose MHS 30027 P6 = Methyl Hydroxyethyl Cellulose (MHEC)= Cellulose methyl ether, 2-hydroxyethyl ether, modified (9032-42-2) = Cellulose, 2-hydroxyethyl methyl ether
Cas No: 9032-42-2
EC / List no.: 618-528-0
Cellulose methyl ether, 2-hydroxyethyl ether, modified (9032-42-2)
Cellulose, 2-hydroxyethyl methyl ether
Hydroxyethyl methyl cellulose
hydroxyethylmethylcellulose
Hymetellose
Methyl hydroxyethyl cellulose
Other IUPAC names
2-Hydroxyethyl methyl cellulose
CELLULOSE, 2-HYDROXYETHYL METHYL ETHER
Cellulose, 2-hydroxyethyl methyl ether
ethane-1,2-diol;(2S,3R,4R,5S,6R)-2-(hydroxymethyl)-6-[(2S,3R,4S,5S,6S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol;(2S,3S,4R,5S,6S)-2,3,4-trimethoxy-6-(methoxymethyl)-5-[(2R,3S,4R,5S,6S)-3,4,5-trimethoxy-6-(methoxymethyl)oxan-2-yl]oxyoxane
Hidroxyethyl Methyl Cellulose Ether
hydroxyethylmethylcellulose
Methyl 2-Hydroxyethyl Cellulose
Methyl 2-hydroxyethyl cellulose
methyl 2-hydroxyethyl cellulose
methyl 2-hydroxyethylcellulose
Methyl hydroxyethyl cellulose
Methyl Hydroxyethylcellulose
Other names
hydroxyethyl methyl cellulose
Hydroxyethylmethylcellulose
methyl 2-hydroxyethyl cellulose
Tylose MHS 30027 P6 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. Tylose MHS 30027 P6 is a rheological additive for special applications, paints and coatings industry
Tylose MHS 30027 P6 is an additive for mortar.
Tylose MHS 30027 P6 displays very fast consistency development, moderate sag resistance and water demand, high water retention and heat stability, and low influence on cement hydration.
This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement renders and EIFSs.
Recommended use of Tylose MHS 30027 P6 : Rheological Additive
Special applications
Coating material
Additive for mortar
Tylose MHS 30027 P6 is water soluble, nonionic cellulose ether, which is offered as free flowing powder
Tylose MHS 30027 P6 may contain further additives which for example control the dissolution behavior or the thickening power.
Name CAS-No. % Classification according to the model Work Health and Safety Regulations (WHS Regulations)
Cellulose methyl ether, 2-hydroxyethyl ether, modified 9032-42-2
90 – 95 %
Not classified
Other substances (not contributing to the classification of this product)-
5 – 10 %
Not classified
Cement render
Tylose MHS 30027 P6
Viscosity: Höppler 30000 mPa•s
Consistency development: very fast
Final consistency: moderate
Sag resistance: moderate
Water demand: moderate
Water retention: high
Influence on cement hydration: low
Heat stability: high
Physical and chemical properties
Physical state : Solid
Appearance : Powder.
Colour : whitish
Odour : odourless
Odour threshold : No data available
pH : 6 – 8 10g/l
Relative evaporation rate (butylacetate=1) : Not specifically applicable
Melting point / Freezing point : Melting point: Not specifically applicable
Freezing point: Not specifically applicable
Boiling point : Not specifically applicable
Flash point : Not specifically applicable
Auto-ignition temperature : > 170 °C
Flammability (solid, gas) : No data available
Vapour pressure : Vapour pressure: Not specifically applicable
Vapour pressure at 50 °C: Not specifically applicable
Relative density : Relative vapour density at 20 °C: Not specifically applicable
Density : Density: 1.1 – 1.5 g/cm³ 20 °C
Relative density: Not specifically applicable
Solubility : Water: > 10 g/l @ 20°C
Log Pow : < 0
Viscosity, kinematic : Not specifically applicable
Viscosity, dynamic : Not specifically applicable
Explosive properties : Product is not explosive. Dust may form explosive mixture in air.
Explosive limits : No data available
Minimum ignition energy : > 10 mJ
Fat solubility : No data available
Conbustion class : 5
Smoldering temperature : >450 °C
pmax : 10 bar
Dust explosion category : ST1
KSt : < 200 bar*m/s
Ignition temperature : > 400 °C
Storage conditions : Tylose MHS 30027 P6 is hygroscopic. Protect from atmospheric moisture and water.
Stability and reactivity
Reactivity : The product is non-reactive under normal conditions of use, storage and transport.
Chemical stability : Stable under normal conditions.
Possibility of hazardous reactions : No dangerous reactions known under normal conditions of use.
Conditions to avoid : No decomposition if stored normally.
Incompatible materials : Strong oxidizing agent.
Hazardous decomposition products : Under normal conditions
Description of necessary first-aid measures
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Call a doctor.
First-aid measures after skin contact : Wash skin with plenty of water.
First-aid measures after eye contact : Rinse immediately with plenty of water, also under the eyelids. Consult an ophthalmologist if irritation persists.
First-aid measures after ingestion : Rinse mouth. If symptoms persist, call a physician.
Symptoms caused by exposure
Symptoms/effects after skin contact : May cause sensitisation of susceptible persons by skin contact.
Symptoms/effects after eye contact : May cause eye irritation.
Medical attention and special treatment
Treatment : Treat symptomatically.
Tylose MHEC (methyl hydroxyethyl cellulose/Tylose MH-grades) are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form.
Tylose MHEC may contain further additives which for example control the dissolution behavior or the thickening power.